Sonraíocht
| Táirge Deiridh | Sonraíocht |
| barra | ASTM B36, B19, SAE J463, J461 |
| Miotal Filler Brazing | QQ CHÓNAIDHME-B-650 |
| Cupáin, Cás Cartúis | ASTM B129, MILITARY MIL-C-10375, |
| Diosca | ASTM B19 |
| Pláta | AMS 4507, 4505, ASTM B19, B36 |
| Slat | SAE J463, J461 |
| Bileog | AMS 4507, 5408, 4505, ASTM B19, B36, SAE J463, J461 |
| Stoc Shim, Laminated | MILITARY MIL-S-22499 |
| Stráice | AMS 4507, 4505, ASTM B36, B569, B19, B888, SAE J463, J461 |
| Feadán, gan uaim | ASTM B135, WW CHÓNAIDHME-T-791, MILITARY MIL-T-20219, SAE J463, J461 |
| Feadán, Táthaithe | ASTM B587, B587 |
| Sreang | ASTM B134, SAE J463, J461 |
Comhdhéanamh Ceimiceach
| Cu | Fe | Pb | Zn | |
|---|---|---|---|---|
| Íosmhéid./Uasmhéid. | 68.5-71.5 | 0.05 | 0.07 | Rem. |
| Ainmneach | 70 | - | - | 30 |
Airíonna Machanical
| Teocht | Sect. Méid | Obair Fuar | Cineál Min | Teocht | Neart Teanntachta | TÁ 0.05% UL |
TÁ 0.02% Fritháireamh |
TÁ 0.005% Fritháireamh |
Elong. | RH B |
RH C |
RH F |
RH 30T |
VH 500 |
BH 500 |
BH 3000 |
Fiar Neart |
Tuirse Neart |
Izóid Tionchar Neart |
| - | isteach. | % | - | F | ksi | ksi | ksi | ksi | % | B | C | F | 30T | 500 | 500 | 3000 | ksi | ksi | ft-lb |
| - | mm. | - | - | C | MPa | MPa | MPa | MPa | - | - | - | - | - | - | - | - | MPa | MPa | J |
| TÁIRGÍ COMHRÉIDH | |||||||||||||||||||
| OS015 | 0.04 | 68 | 53 | 22 | - | - | - | - | - | - | - | - | - | - | 35 | 14 | |||
| OS015 | 1 | 0 | CINEÁL | 20 | 365 | 152 | - | - | 54 | - | - | 78 | 43 | - | - | - | 241 | 97 | 0 |
| H02 | 0.04 | 68 | 62 | 52 | - | - | - | - | - | - | - | - | - | - | 40 | 18 | |||
| H02 | 1 | 0 | CINEÁL | 20 | 427 | 359 | - | - | 25 | 70 | - | - | 65 | - | - | - | 276 | 124 | 0 |
| H06 | 0.04 | 68 | 86 | 65 | - | - | - | - | - | - | - | - | - | - | 46 | - | |||
| H06 | 1 | 0 | CINEÁL | 20 | 593 | 448 | - | - | 5 | 88 | - | - | 76 | - | - | - | 317 | - | 0 |
| OS100 | 0.04 | 68 | 44 | 11 | - | - | - | - | - | - | - | - | - | - | - | 2 | |||
| OS100 | 1 | 0 | CINEÁL | 20 | 303 | 76 | - | - | 66 | - | - | 54 | 11 | - | - | - | - | 13 | 0 |
| OS035 | 0.04 | 68 | 49 | 17 | - | - | - | - | - | - | - | - | - | - | 34 | 14 | |||
| OS035 | 1 | 0 | CINEÁL | 20 | 338 | 117 | - | - | 57 | - | - | 68 | 31 | - | - | - | 234 | 97 | 0 |
| H04 | 0.04 | 68 | 76 | 63 | - | - | - | - | - | - | - | - | - | - | 44 | 21 | |||
| H04 | 1 | 0 | CINEÁL | 20 | 524 | 434 | - | - | 8 | 82 | - | - | 73 | - | - | - | 303 | 145 | 0 |
| H08 | 0.04 | 68 | 94 | 65 | - | - | - | - | - | - | - | - | - | - | 48 | 23 | |||
| H08 | 1 | 0 | CINEÁL | 20 | 648 | 448 | - | - | 3 | 91 | - | - | 77 | - | - | - | 331 | 159 | 0 |
| OS070 | 0.04 | 68 | 46 | 14 | - | - | - | - | - | - | - | - | - | - | 32 | 13 | |||
| OS070 | 1 | 0 | CINEÁL | 20 | 317 | 97 | - | - | 65 | - | - | 58 | 15 | - | - | - | 221 | 90 | 0 |
| OS050 | 0.04 | 68 | 47 | 15 | - | - | - | - | - | - | - | - | - | - | - | - | |||
| OS050 | 1 | 0 | CINEÁL | 20 | 324 | 103 | - | - | 62 | - | - | 64 | 26 | - | - | - | - | - | 0 |
| H10 | 0.04 | 68 | 99 | 65 | - | - | - | - | - | - | - | - | - | - | - | - | |||
| H10 | 1 | 0 | CINEÁL | 20 | 683 | 448 | - | - | 3 | 93 | - | - | 78 | - | - | - | - | - | 0 |
| H01 | 0.04 | 68 | 54 | 40 | - | - | - | - | - | - | - | - | - | - | 36 | - | |||
| H01 | 1 | 0 | CINEÁL | 20 | 372 | 276 | - | - | 43 | 55 | - | - | 54 | - | - | - | 248 | - | 0 |
| ROD | |||||||||||||||||||
| H02 | 1 | 68 | 70 | 52 | - | - | - | - | - | - | - | - | - | - | 42 | 22 | |||
| H02 | 25.4 | 20 | CINEÁL | 20 | 483 | 359 | - | - | 30 | 80 | - | - | - | - | - | - | 290 | 152 | 0 |
| OS050 | 1 | 68 | 48 | 16 | - | - | - | - | - | - | - | - | - | - | 34 | - | |||
| OS050 | 25.4 | 0 | CINEÁL | 20 | 331 | 110 | - | - | 65 | - | - | 65 | - | - | - | - | 234 | - | 0 |
| H00 | 1 | 68 | 55 | 40 | - | - | - | - | - | - | - | - | - | - | 36 | - | |||
| H00 | 25.4 | 6 | CINEÁL | 20 | 379 | 276 | - | - | 48 | 60 | - | - | - | - | - | - | 248 | - | 0 |
| TUBE | |||||||||||||||||||
| H80 | 0 | 68 | 78 | 64 | - | - | - | - | - | - | - | - | - | - | - | - | |||
| H80 | 0 | 35 | CINEÁL | 20 | 538 | 441 | - | - | 8 | 82 | - | - | 73 | - | - | - | - | - | 0 |
| OS025 | 0 | 68 | 52 | 20 | - | - | - | - | - | - | - | - | - | - | - | - | |||
| OS025 | 0 | 0 | CINEÁL | 20 | 359 | 138 | - | - | 55 | - | - | 75 | 40 | - | - | - | - | - | 0 |
| OS050 | 0 | 68 | 47 | 15 | - | - | - | - | - | - | - | - | - | - | - | - | |||
| OS050 | 0 | 0 | CINEÁL | 20 | 324 | 103 | - | - | 65 | - | - | 64 | 26 | - | - | - | - | - | 0 |
| WIRE | |||||||||||||||||||
| OS035 | 0.08 | 68 | 50 | - | - | - | - | - | - | - | - | - | - | - | 34 | - | |||
| OS035 | 2 | 0 | CINEÁL | 20 | 345 | - | - | - | 60 | - | - | - | - | - | - | - | 234 | - | 0 |
| H08 | 0.08 | 68 | 130 | - | - | - | - | - | - | - | - | - | - | - | 60 | 22 | |||
| H08 | 2 | 0 | CINEÁL | 20 | 896 | - | - | - | 3 | - | - | - | - | - | - | - | 414 | 152 | 0 |
| OS025 | 0.08 | 68 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
| OS025 | 2 | 0 | CINEÁL | 20 | 359 | - | - | - | 58 | - | - | - | - | - | - | - | - | - | 0 |
| OS015 | 0.08 | 68 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
| OS015 | 2 | 0 | CINEÁL | 20 | 372 | - | - | - | 56 | - | - | - | - | - | - | - | - | - | 0 |
| OS050 | 0.08 | 68 | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
| OS050 | 2 | 0 | CINEÁL | 20 | 331 | - | - | - | 64 | - | - | - | - | - | - | - | - | - | 0 |
| H00 | 0.08 | 68 | 58 | - | - | - | - | - | - | - | - | - | - | - | 38 | - | |||
| H00 | 2 | 0 | CINEÁL | 20 | 400 | - | - | - | 35 | - | - | - | - | - | - | - | 262 | - | 0 |
| H01 | 0.08 | 68 | 70 | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
| H01 | 2 | 0 | CINEÁL | 20 | 483 | - | - | - | 20 | - | - | - | - | - | - | - | - | - | 0 |
| H06 | 0.08 | 68 | 124 | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
| H06 | 2 | 0 | CINEÁL | 20 | 855 | - | - | - | 4 | - | - | - | - | - | - | - | - | - | 0 |
Airíonna Fisiceacha
| Maoin Táirge | SAM Gnáth | méadrach |
| Comhéifeacht Leathnú Teirmeach | 11.1 · 10-6in aghaidhoF (68-572 ÌÎ?̴åÁF) | 20.0 · 10-6in aghaidhoC (20-300 C) |
| Dlús | 0.308 lb/in3 @ 68 F | 8.53 gm / cm3 @ 20 C |
| Seoltacht Leictreach | 28 %IACS @ 68 F | 0.164 MegaSiemens/cm @ 20C |
| Friotaíocht Leictreach | 37.0 óm-cmil/ft @ 68 F | 6.15 micrihm-cm @ 20 C |
| Leachtphointe Leáphointe SAM | 1750 F | 954 C |
| Leáphointe Soladach SAM | 1680 F | 916 C |
| Modúil leaisteachas i dTeannas | 16000 ksi | 110000 MPa |
| Modúil Rigidity | 6000 ksi | 41370 MPa |
| Domhantarraingt ar leith | 8.53 | 8.53 |
| Acmhainn Teasa Sonrach | 0.09 Btu/lb/oF @ 68 F | 377.1 J/kg ·oK ag 293K |
| Seoltacht Theirmeach | 70.0 Btu · ft/ (uair · ft2 ·oF) @ 68 F | 121.2 W/m · oK ag 20C |
Teocht
| Cineál Táirge | Cineál Temper |
| BAR, ROLLED | H02, OS070, OS100 |
| SLÁINTIÚIL | H01, H02, OS035, OS050, OS070 |
| STRIP, rolladh | H01, H02, H04, H06, H08, H10, OS015, OS025, OS035, OS050, OS070, OS100 |
| Sreangán, DRAWN | H02, OS050 |
| WIRE, rollta | H02, H04, H06, OS035, OS050, OS070, OS100 |
| Cruthanna | M30 |
| TUBE | H58, H80, OS025, OS050 |
| WIRE | H00, H01, H06, H08, OS015, OS025, OS035, OS050 |
Déantúsaíocht
| Teicníc Ceangal | Oiriúnacht |
| Brazing | Ar fheabhas |
| Butt Weld | Maith |
| Cumas chun Fuar Oibriú | Ar fheabhas |
| Cumas chun Bheith Te Foirmithe | Cóir |
| Táthú Stua Miotail Brataithe | Ní mholtar |
| Táthú stua Gáis Sheilded | Maith |
| Rátáil machinability | 30 |
| Táthú Oxyacetylene | Maith |
| Seam Weld | Ní mholtar |
| sádráil | Ar fheabhas |
| Spot Weld | Cóir |
Táirge Cartús Práis ar Fáil
| Slat C26000 | CDA 260 barraí annealed |
| C26000 barra cothrom | CDA 260 barraí bhabhta fuar críochnaithe |
| Barra heicsidheachúlach C26000 | CDA 260 barraí cruinne brionnaithe |
| C26000 barra cearnach | CDA 260 barraí te rollta |
| Barra dronuilleogach C26000 | Barra Babhta CDA 260 |
| seafta C26000 | CDA 260 sreang |
| C26000 billet | Bileog CDA 260 saor in aisce, |
| Barra snasta C26000 | CDA 260 Pláta |
| Barraí fuartharraingthe C26000 | CDA 260 stiallacha |
| barraí annealaithe C26000 | Scragall CDA 260 |
| Barraí cruinne críochnaithe fuar C26000 | CDA 260 Shims |
| Barraí cruinne brionnaithe C26000 | CDA 260 Coil |
| Barraí teorollta C26000 | CDA 260 Píob |
| Barra Babhta C26000 | CDA 260 feadáin |
| Sreang C26000 | CDA 260 |
| Íoslódáil bileog eolais C26000 | slat |
| Pláta C26000 | barra cothrom |
| C26000 stiallacha | barra heicsidheachúlach |
| Scragall C26000 | barra cearnach |
| C26000 Shims | barra dronuilleogach |
| C26000 Coil | seafta |
| C26000 Píob | billet |
| C26000 feadáin | barra snasta |
| C26000 | barraí fuar tarraingthe |
| CDA 260 slat | barraí annealed |
| CDA 260 barra cothrom | barraí bhabhta fuar críochnaithe |
| CDA 260 barra heicsidheachúlach | barraí bhabhta brionnaithe |
| CDA 260 barra cearnach | barraí te rollta |
| Barra dronuilleogach CDA 260 | Barra Babhta |
| CDA 260 seafta | Sreang |
| CDA 260 billet | Bileog |
| CDA 260 barra snasta | Pláta |
| CDA 260 barraí fuartharraingthe | Stiallacha |
| Coil | Scragall |
| Píob | Shims |
| feadáin | |
| CDA 230 barra heicsidheachúlach | |
| CDA 230 barra cearnach | |
| Barra dronuilleogach CDA 230 | |
| CDA 230 Shims | |
| CDA 230 Coil | |
| CDA 230 Píob |
Tionscail
Tionscal Leictreach
Tionscal Stroighne
Conraitheoir Leictreach
Trealamh Leictreach
Tionscail Déantúsaíochta
Tionscal siúcra agus páipéir
Tionscal Peitril & Ceimiceach
Ár mhonarcha
Déanann ár monarcha speisialtóireacht i dtáirgeadh agus déantúsaíocht táirgí copair ardchaighdeáin. Oibrímid líne táirgeachta chuimsitheach, dar críoch- atá feistithe le ard-mhuilinn réitigh agus rollta leanúnach, meaisíní líníochta beachta, muilte rollta ardluais, agus córais uathoibrithe cóireála teasa. Táirgeann muid go gairmiúil raon leathan feadáin copair, plátaí, barraí, sreanga agus scragaill. Cuirtear córas dian iniúchta cáilíochta i bhfeidhm ar fud an phróisis ar fad, ó iontógáil amhábhar go dtí seachadadh táirgí críochnaithe. Le tacaíocht ó ionstraimí beachta amhail speictriméadar, micreascóip mhiotalagrafaíochta, meaisíní tástála teanntachta, braite lochtanna srutha eddy, agus tomhasairí toise léasair, cinntímid go gcomhlíonann ár gcuid táirgí go hiomlán caighdeáin idirnáisiúnta agus intíre-lena n-áirítear ASTM, EN, JIS, agus GB-i dtéarmaí comhdhéanamh ceimiceach, airíonna meicniúla, cruinneas toise, agus cáilíocht dromchla. Táimid tiomanta do réitigh ábhar copair atá cobhsaí, iontaofa agus go hiomlán-sonraithe a sholáthar do chustaiméirí domhanda.
pacáistiú táirgí copair
Déantar ár gcuid táirgí a phacáistiú trí úsáid a bhaint as réitigh pacáistithe tionsclaíocha gairmiúla, saincheaptha chun a chinntiú go bhfanann siad slán le linn achair fhada agus illáimhseála. I gcás táirgí fada cosúil le feadáin agus barraí copair, úsáidimid cliathbhoscaí adhmaid atá láidir uiscedhíonach nó boscaí fráma miotail chun iad a shocrú agus a chosaint go slán. Déantar plátaí copair agus scragaill a fhilleadh ina n-aonar le páipéar frith-meirge, ansin pacáilte i mboscaí cruach nó ar phailléid le coirnéil chrua threisithe. Déantar sreanga copair a fhoirceannadh le scannán cosanta ó thaise agus coilítear go néata ar ríleanna atá deartha le saincheaptha nó cuirtear i gcásanna adhmaid iad. Tá gach pacáistiú marcáilte go soiléir de réir riachtanais an chustaiméara le marcanna loingseoireachta, sonraíochtaí, uimhreacha baisc, agus siombailí láimhseála. Is féidir triomaigh a chur taobh istigh de na pacáistí freisin nuair is gá, ag soláthar cosaint iomlán i gcoinne meirge, taise agus tionchair ar feadh an turais iomlán ón táirgeadh go dtí an calafort cinn scríbe.
